|
|
Home Page
1200C Split Tube Furnace (18" heating zone) w/ Optional Quartz Tube & Flange 2" to 4" - OTF-1200X series
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
Transported by LTL Freight (Truck)
Product Options
| UL/CSA Certification: |
|
| furnace size: |
|
|
OTF-1200X-UL furnace is configurated to meet UL/CSA certificate standards. The furnace can adopt a 60, 75, 80, or 100mm O.D quartz tube and a pair of stainless steel vacuum sealing flanges with needle valves & gauge allow heating samples under vacuum or gas flow conditions. The temperature of this tube furnace is controlled by a high-precision digital controller which provides 30 programmable segments with +/- 1°C accuracy. The max. working temperature is 1200°C. SPECIFICATIONS:
Furnace Structure
|
- A double-layer steel casing with air cooling keeps furnace surface temperature lower than 60°C.
- High purity fibrous alumina insulation for maximum energy saving.
- The special refractory coating on the liner and heating element increases furnace life.
- Split cover with Interlock protection, cut the power if the door opens during furnace heating process.
|
| Voltage and Power |
- Input voltage 208 - 240VAC Single Phase, 50/60Hz
3KW, Circuit breaker 20A
|
Heating Temperature
|
- Fe-Cr-Al Alloy doped by Mo
- Max. heating temperature: 1200°C (inert gas must be filled inside the tube to resist deformation)
- Vacuum heating temperature: 1000°C under vacuum
- Heating rate: 20°C /min Max
- Thermocouple: K type 220mm (8.7") Length with Ceramic Sheath, please click the link to order spare.
|
Heating Zone
|
- Total heating zone length: 440mm (~ 18")
- Constant temperature zone: 150mm (+/2°C)
- Please click the image below to view the temperature distribution at 980°C.
|
Temperature Controller
 
|
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
- The software for PC software is included
|
Temperature controller (optional)
|
- The temperature controller can be graded to the Eurotherm 3000 Temperature Controller with +/- 0.1°C accuracies. This package includes a Eurotherm 3004 programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full specs
|
| Fused Quartz Tube Size |
OTF-1200X-60
60 O.Dx55 I.Dx1000 mm L
|
OTF-1200X-75
76 O.Dx70 I.Dx1000 mm L |
OTF-1200X-80
80 O.Dx74 I.Dx1000mm L |
OTF-1200X-100
101 O.Dx92 I.Dx 1000mm L |
| Refractory Blocks |
- Two fibrous ceramic tube blocks are included for blocking heat radiation from the inside tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating)
- Quartz blocks (optional) are ideal for cleaner processing and higher vacuum efficiency.
- You may order flange support to avoid tube rotating ( click Pic below right )
  .jpg)
|
Vacuum Flange
 
 
|
- One pair of SS 304 vacuum flange is included
- Left flange:
- one thermal feedthrough (for 1/4" OD sheathed thermocouple)
- one needle valve
- one mechanical vacuum gauge -0.1Mpa to 0.15Mpa
- one barb fitting ( click PiC, below left-2 for detail)
- Right flange:
- one KF-25 vacuum port and one needle valve.
- Optional
- An anti-Corrosive gas-type independent (above 10mbar) digital vacuum gauge with a wide range between 3.8x10-5 to 1125 Torr is optional. Aside from greater measurement precision, this gauge reduces the risks of chamber explosions caused by the incorrect reading of gas pressures due to gas-type dependency.
- The flange with quartz window is available for in-situ Raman or Mossbauer analysis
|
Vacuum Pressure
 
|
- 10E-2 torr by a quality mechanical vacuum pump
- 10E-5 torr by the turbopump.
- The vacuum pump is optional. Please click here to choose a vacuum pump.
|
Product Dimensions
|
 600mm(L) ×440mm(W) × 550mm(H)
|
|
Net Weight |
40kg |
| Shipping Dimensions |
45"(L) x 45"(W) x 42"(H) |
| Shipping Weight |
200lbs |
Warranty
|
One-year limited warranty with lifetime support (Consumable parts such as processing tubes, O-rings are not covered by the warranty, please order replacements at related products below.) |
| Compliance |
- CE Certificate
- NRTL or CSA certification is available upon request and at an extra cost
|
Application Notes
 Click here to learn the installation of a gas regulator
|
- Tube furnaces with quartz tubes are designed for use under vacuum and low pressure < 0.2 bars / 3 psi / 0.02 MPa. Vacuum pressures may only be safely used up to 1000°CThe flow rate for gasses should be limited to<200 SCCM (or 200ml/min)
- The heating module is consumable. Please click picture 1 to order a replacement.
- The automatic vacuum-sealed sliding device is available for fast heating and cooling ( Pic. 2)
 Pic. 1 Pic. 2
|
Operation Video
Click here to learn How to set up a quartz/ ceramic tube and vacuum flange for an MTI Tube furnace. ( also, click the picture left to see the demo video ) |
   |
STANDARD PACKAGE:
|
|
|
|
|
|
|
|
Sale Price: Starting at USD$9,998.00
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|