|
|
Home Page
Compact Tape Casting Coater w/ Vac. Chuck (200Wx365L mm) & Film Applicator & Optional Heater - MSK-AFA-III
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
Transported by LTL Freight (Truck)
Product Options
| Configuration: |
|
|
MSK-AFA-III is a compact tape-casting coater with various heating designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place. One 100 mm width adjustable micrometer applicator (doctor-blade). The heating plate with the digital controller either on top or bottom is optional for drying up to 100°C with +/-1°C temperature accuracy. This equipment can be used by researchers on ceramic tape castings and Li-Ion battery electrode coating.
Bottom heated upgrade to Max. 120°C since Jan.15, 2019; Top UV Light is added for the curing process of polymers since March 10, 2019.
Specifications:
Model
|
MSK-AFA-I
|
MSK-AFA-III-HB
|
MSK-AFA-III-110/220
|
MSK-AFA-III-HB
-UV-110/220
|
MSK-AFA-IIIT-HBT
|
| Optional Heating Cover Voltage and Power |
No Heating
|
Bottom Heating 110/ 220VAC 850W 120ºC
|
Top Heating
1.2KW, 100ºC
|
Top UV (WL: 365nm)
Bottom Heating, 1kW, 120ºC
|
Top and Bottom Heating
110/220V, 2.3 kW, 120ºC
|
| Working Power |
- Power adaptor: Input 100-240VAC, Output 24VDC
|
| Traverse Speed |
- 10 - 100 mm/sec variable
- Accuracy: ± 5-10 mm/sec
|
Coating Area
|
- Standard Package: 320mm(L) x 100mm(W) due to the width and occupied area of the 100mm applicator
- Suggested Maximum: 350mm(L) x 180mm(W) Reduced width to avoid slurry spilling off the vacuum bed
- Length 10 - 350 mm adjustable by using Adjustable Position Switch
|
Vacuum Chuck
|
- Vacuum chuck made of Aluminum alloy with ~ 1.0 mm hole and hole distance of ~14.3 mm
- Vacuum Chuck Dimensions: 365mm(L) x 200mm(W) （ 14“L x 8"W )
- Note: You may order a glass plate to coat slurry on a porous substrate at the link below
 
|
| Coating Area |
- Maximum: 350mm(L) x 180mm(W) Reduced width to avoid slurry spilling off the vacuum bed
- Length 10 - 350 mm adjustable by using Adjustable Position Switch
|
Film Applicator
 
|
   Note: A thinnest film that can be achieved is > 10 microns
|
Vacuum Pump
 (optional) |
|
Pump connector
|
- The vacuum control power switch is located on the front panel, and the power plug ( female ) is built into the back of the machine to connect an optional vacuum pump
- The pump connector is a compression-type 8mm O.D tube fitting which is located on the back panel (see pic below). An 8mm Dia. x 4ft polyurethane tube is included
 
|
Heating Cover(Optional) |
- Pre-installed on the top cover
- Built-in digital temperature controller with an accuracy of +/-1°C
- Suspension support helps open the cover easily and safely
- Max. Heating Temp.: 100°C
- Note: In order for faster and uniform heating, please preheated the vacuum chunk to 60- 70°C before coating, and keep heating during coating, then close the cover and increase the temperature to ~100°C after coating
|
| UV Lamp (UV option only) |
- Power: 8W
- Lamp Diameter: 15.5mm
- Lamp Length: 287mm
- Service Life: 3000 hours
|
| Product Dimensions |
For MSK-AFA-I (without Dryer Cover)
550 (L) x 330 (W) x 150 (H), mm |
For MSK-AFA-III (with Top heater)
550mm(L) x 330mm(W) x 320mm(H)
|
Compliance
|
- CE Certificate
- NRTL or CSA certification is available upon request
|
| Warranty |
One-Year limited warranty with lifetime support |
Operation Video
|
|
| Application Notes |
|
| Net Weight |
45 kg (96 lbs) |
60 kg (135 lbs) |
| Shipping Weight & Dimension |
160 lbs, 40" x 30" x 30" |
|
|
|
Sale Price: Starting at USD$2,489.00
|
|
|
|
|
|
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|