|
|
Home Page
1200°C max. 3-Zone Tube Furnace( Ø150mm, 6" Max) with Tube & Flange - GSL-1200X-Ⅲ-D6
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
In stock
Item Number: GSL1100XIII6
Transported by LTL Freight (Truck)
|
GSL-1100X-Ⅲ-6 is a 6" ( 150 mm) dia. solid tube furnace with 3 heating zones and a 1200oC working temperature。 The tube furnace is equipped with a touch screen control system, that allows a one-click start/stop multi-temperature zone, the automatic recording. The temperature profile can pre-store up to 5 programs. The furnace can accept quartz tubes with the optional diameter of 80, 100, 130, and 150mm. Vaccum-sealed stainless steel sealing flanges is available as an option for the heat treatment of sample under a controlled atmosphere
SPECIFICATIONS:
|
Furnace Structure
|
- Touch screen control with one-click start/stop multi-temperature zone
- Automatic record (stored for 1 month)
- Preset temperature curve function
- Energy-saving high-purity Al2O3 fibrous insulation liner with an aluminum oxide coating
- Extended lifespan
- Solid tube insulation provides a more uniform temperature zone
|
Power
|
- AC220V 50/60HZ, single phase
- 12kW
- Power cable is included without plug ( The plug may be available upon request )
|
|
Working Temperature
|
|
Heating Zone
|
|
|
Temperature Controller
|
|
|
Temperature Calibrator Kit
(Optional at extra cost)
|
|
Processing Tube & Tube Adapter, and vacuum-sealed flange
(Sold Separately)
|
- Quartz Tube ( click link below to choose q quartz tube
- Fibrous ceramic tube blocks can block heat radiation generated from the tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating). ( Pic. 1)
- Quartz blocks (optional) are ideal for cleaner processing and higher vacuum efficiency. ( Pic. 2)
- Please click Picture 5 to choose a pair of vac. flange ( Pic. 3)
- Please click pic 4 to choose a crucible
. Pic. 1  Pic. 2  {Poc. 3  Pic. 34
|
|
Vacuum Pressure
(Sold Separately)
|
- 50 m-torr can be achieved by a mechanical pump
- 10^-5 torr and 10-6 torr can be reached by turbopump
  
|
|
Dimensions
|
1620(L)*550(W)*730(H) mm |
|
Weight
|
~ 136kg
|
|
Warranty
|
One-year limited warranty with lifetime support.
|
Application Notes
Click here to learn about the installation of a gas regulator
|
- Tube furnaces with quartz tubes are designed for use under vacuum and low pressure < 0.2 bars
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn about the installation of a gas regulator.
- The vacuum limit for all quartz tube furnaces is < 1000oC.
- The flow rate for gases should be limited to< 200ml/min) to reduce thermal shocks to the tube
- Please click here to see our typical temperature profile calibration results at various temperatures.
- In order to obtain accurate temperature inside a tube furnace, please click here to learn how to calibrate the temperature on your own.
- How to set up a ceramic tube and vacuum flange for MTI tube furnaces.
|
| WARNING |
- If the end-user has to close the valve to heat the sample, ALWAYS pay attention to the pressure gauge indicator. BE SURE the pressure is lower than 0.02 MPA(use a relief valve) to prevent accidents. The end user is responsible for taking the relevant protection and explosion-proof measures, and all the consequences when processing any flammable, explosive, or toxic gases. MTI DO NOT recommend processing within any flammable, explosive, or toxic gases.
- The equipment must work under the independent power supply network, and the voltage range of the power supply network should be within ± 8%
- DON'T share the power supply with the equipment of high magnetic fields such as intermediate frequency and high frequency, stay away from the equipment of intermediate frequency, and prevent the space electromagnetic radiation
- Keep away from liquid spatter
- Keep away from conductive powder
|
|
Reference Video
|
 |
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|