• The furnace is consistent with six-tube furnace modules with quartz tube 50 OD x 460 L, mm 
• Each heating module's temperature is controlled independently up to 1200°C
• Quickly sealed flange,  Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas
• Processing six batches of  samples with the different temperatures at compact space 

• Ni-Cr-Al- resistance wire

Working Temperature 

• Max.Working Temperature 1200° C

• High purity quartz tube with   Φ50X L 460 mm, 6 tubes included
• 4 flowmeters are included 
• The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves
• Max. Vacuum  10^-5 torr by a turbopump
• Only one vacuum pump required via a KF25 port.  Click the picture below to choose a vacuum pump
•    

• Six digital Programmable Temperature Controllers built-in
• Includes over-temperature and broken thermal couple alert.
• 6 channel heating tube is controlled independently by 24 segments programmable temperature controller
  
• 6 S type Thermal Couple
• Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.

Heating Rate

•  20 °C/ min Max.    

Temperature Accuracy

• +/- 1.0 °C

Power &  Working Voltage

• 10 KW, 208 - 240V single phase,  50/60Hz  ( if 6 heating modules operation at the same time )
• Note： Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.

• CE Certified
•  NRTL (UL61010)  or CSA certification is available upon request at extra cost.

Dimension 

Warranty

Operation Instruction

Warning &
Application note