|
|
Home Page
Gravity Impact Tester with Remote Control & Free Fall Option for Battery Testing (UN 38.3.4.6 & IEC 62133)-MSK-TE902-UL
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
In stock
Item Number: MSKTE902
Transported by LTL Freight (Truck)
|
MSK-TE902-UL is a UL standard Gravity Impact (Free Fall) Tester that can simulate an impact to a lithium battery based on UN38.3 standard (38.3.4.6). Battery Free Fall Testing based on IEC-62133-8.3.3 standard is feasible with this tester.Note: MSK-TE902 was updated to MSK-TE902-UL since Jan.12,2017
SPECIFICATIONS
| Power |
208 - 240VAC (110VAC available upon request), 1KW
|
| Cell Testing compatibility |
Compatible with most commercialized Prismatic, Coin, Cylindrical, Pouch batteries
Testing Standards: UN 38.3.4.6, GB31241-2014, GB/T18287-2000... |
| Gravity Mass |
Mass can be set at 9.1 Kg or 10 kg. (Deadweight is available for minor adjustment of the impact force)
|
| Drop Height |
600 mm - 1000 mm adjustable |
Horizontal Steel Rod
|
- 15.8 mm Dia steel rod is included for the impact test
- Customized diameter is available upon request
|
Chamber
 
|
- Anti-explosion reinforced double-layer steel chamber
- Inside chamber: made of 1 mm thickness cold rolled SS304 with tensile strength > 500 Mpa
- Outside casing: made of 3 mm thickness annealed A3 steel with Tensile strength > 400 Mpa
- Explosion-proof window: L 382mm x W 332mm
- Double layer 5 mm thick anti-explosion glass with sandwiched shattering proof film
- Max. Working Space in the chamber: L300mm*W250mm*H1000mm
- Built-in illuminator
- Rolling wheels are installed on the bottom for easy transportation
|
Control Unit
 
|
- 6" color touch screen control panel for operating and setting parameters
- Electric motor with worm gear reducer for raising and lowering the weight
- In the case of an electrical outage, the weight will be lowered and locked in position automatically
- Once the parameter setup on the touch screen, a wireless hand-held remote controller will operate the machine within 10 meters distance for the safest operation
|
Venting
|
- A venting port is installed in the back chamber which shall be connected to your venting system. Duct included. (exhaust fan is not included)
- Warning: Must keep venting fan and exhaust system running during battery testing to avoid pressure build-up in the case of battery explosion.
- A Centrifugal inline exhaust fan with aluminum flex duct connection is recommended and optional. (Click pic below to read detail)
- The machine should be placed in a fume hood or a well-circulated room
   
|
Safety Door
|
- A pressure relief door is on the back of the chamber. In the case of a battery explosion, the door will "pop" to release the pressure inside of the chamber.
- Attention: Do not block the Pressure Relief Door
|
Free Fall Testing (Optional) |
- Freefall testing based on IEC-62133-8.3.3 is feasible with electric driven testing fixtures (Picture left). The additional cost will apply, please contact us for more details
- This fixture is only for small single cells. For a larger battery pack, please choose MSK-908
|
| Dimensions |
W 800mm x D 700mm x H 1,815mm |
| Weight |
700 kg |
| Shipping Weight & Dimensions |
|
| Warranty |
One-year limited manufacturer's warranty with lifetime support; extended warranty available upon request at additional cost. |
| Compliance |
- CE certified
- NRTL or CSA certification is available upon request.
   
|
| Demo Video |
  |
| Application Notes |
|
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|