|
|
Home Page
5 Side Heating Atmosphere Controlled Muffle Furnace (1200°C - 16"x16"x 16" 64 L) - KSL-1200X-AC-5S
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
In stock
Item Number: KSL1200XL5AC
|
KSL-1200X- AC-5S is a five-side heating atmosphere-controlled muffle furnace, which is designed for material synthesis under a controlled inert gas atmosphere up to 1100 ºC with better temperature uniformity. The furnace consists of high-quality alumina fiber brick and Kathal Fe-Cr-Al heating elements with 64L capacity, as well as a vacuum-sealed steel case with a water-cooling jacket. It is an ideal tool for preparing new materials that require a heat treatment under inert gas or oxidizing gas. (Updated from KSL-1100X- AC from 8/15/14)
SPECIFICATIONS:
Furnace Structure
 
|
- Double-layer stainless steel structure for maximum vacuum and safety,
- The air-tight stainless steel chamber is built-in with a water-cooling wall, which can stand at positive pressure up to 0.06 Mpa and vacuum up to -0.09Mpa.
- High-purity porous alumina is built-in inside of the refractory alloy muffle as thermal insulation
- Water cooling front door and air-cooling shell
- Built-in Pressure gauge, vacuum valves, and two gas flowmeters.
- The furnace is compatible with Inert gas, vacuum, air, and oxygen.
- An SS310 alloy box inside the heating chamber with the dimension of 12x12x12" s is optional for getting better inert gas heat treatment ($3000 extra)
|
|
Chamber Interior
|
- Five sides heating, e.g. left, right, bottom, back, and front, to achieve the best temperature uniformity than three side heating.
- High-quality fibrous and porous alumina is used as thermal insulation layers.
- Kanthal 1350°C grade Fe-Cr-Al resistance heating wire
- Heating chamber: 400 x 400 x 400 mm (16" x 16" x 16"), 64 Liter
- Vacuum level: (please let us know your requirement)
- 10-1 torr for use of oxygen or inert gas by standard thermal insulation material
|
|
Working Temperature &
Constant Temperature Zone
|
- Continuous Working Temperature 1100° C
- Maximum Working Temperature 1200°C (< 1 hrs)
- Constant temperature zone:
- +/- 2°C within center 200×200×200 mm cubic zone
- +/- 4°C within center 400×400×400 mm cubic zone
|
| Maximum Sample Loading |
|
|
Temperature Controller
|
- FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
|
|
The temperature controller (optional)
|
- MTS02-Y Temperature control software kit (for YD518P series controllers) + brand new laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW with +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic left to view the full spec of the Eurotherm temperature controller.
|
|
Thermocouple
|
|
|
Heating Rate
|
- < 10 °C / min recommended
- 20 °C/ min Max.
|
|
Temperature Accuracy
|
|
Gas flow control &
Vacuum Valve
|
- Two larger flow meters are installed in the front panel of the furnace to allow two types of gas mixing and flowing at the same time
- One KF 25 vacuum port is installed in the left of the furnace to remove air by vacuum pump before filling gas
- One heavy-duty vacuum pump (CE certified) built-in bottom furnace.
|
Water Cooling
 |
- A 16L/min recirculating water chiller is included for cooling the furnace KJ5000
- Short water power off and Over-temperature alarm built-in
|
| Working Gases |
- All types of inert gases such as N2 and Ar at《 0.03Mpa.
- Pure oxygen gas 《 0.03Mpa. but need modifying the internal connection wire for anti-oxidation, please call us in advance if you use O2 gas
- Low vacuum 10-1 torr due to fibrous alumina insulation material. Using 5% H2 + Ar will improve oxidation during heating. For oxygen-sensitive material, please use a hydrogen furnace
|
|
Power & Working Voltage
|
- 9.5 KW, 208 - 240V single phase, 50/60Hz
- Three-phase, AC 380V - 460V available upon request.
- Note： Power cable included but without a plug. Please install a plug by your own
|
Compliance
 
|
- CE Certified
- NRTL (UL61010) or CSA certification is available at extra cost.（ please click mark below to learn details
|
|
Dimension & Net Weight
|
- 2050mm H x 1280mm W x 1200 mm L
- Net weight: 476 Kg
|
|
Shipping Weight & Dimension
|
|
|
Warranty
|
- One-year limited warranty with lifetime support
- We reserve the right to upgrade the furnace structure for better performance without notice
|
|
Demo Video
Operation Instruction
|
|
|
Warning & Note
|
- The Max pressure of this furnace is 7.5 PSI （ 0.5 atm ). You must install a pressure regulator on your gas tank to avoid overpressure. Click here to learn the installation of a gas regulator.
- Corrosive gasses or materials that react with the FeCrAl alloy heating elements cannot be used in the furnace!
- Toxic, corrosive, or flammable gasses are not recommended for use with this furnace. Please consult with our engineering team for more details
- Please contact MTI engineerings whether your processes are compatible with this furnace. Graphite or carbon-based samples are not recommended to use.
|
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|