|
|
Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 1“ID Super-Alloy Tube - OTF-1200X-S-SB
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
Please email for lead time
Item Number: OTF-1200X-S-SB
Transported by LTL Freight (Truck)
|
OTF-1200X-S-FB contains a single temperature zone vertical tube furnace, nickel-based alloy tube, and a re-feeder with a KF25 port. It is a CVD experimental equipment specifically for the deposition of the powder surface with a max working temperature of 1100C and 3 bar gas pressure
| Specifications |
- Voltage: AC 110V 60HZ ( 2208 - 240VAC is available upon request )
- Power：1.2KW
- Working Pressure: -0.1 ~ 0.3MPa (1100℃)
- Maximum Temperature： 1100℃（≤30min）
- Continuous Working Temperature： 1000℃
- Recommend Heating Rate： ≤10℃/min
- Heating Zone： 200mm
- Thermocouple： K Type
|
Heating furnace
|
- Fibrous alumina for thermal insulation
- Double-layer steel structure with air cooling
- Vertical Split door design for easy installation of tube
- Separated temperature control unit
|
Processing tube
Note: If remove the feeder and add hi-pressure fitting, the Max. working pressure can be increased to 10 MPa
|
- Nickel base super-alloy tube with flanges. φ30 OD x φ12 IDX 600 L (mm )
- One mechanical pressure gauge(-0.1-0.3MPa) pre-installed,
- The pre-installed Safety relief valve will turn on automatically once the pressure reaches 0.3Mpa (Pic.1)
- One Ni alloy mesh is installed inside the tube center to carry two layers of materials (Pic. 2 &3)
 Pic. 1  Pic. 2  Pic.3
- A re-feeder connects the tube with a KF25 port on the tube( which is limited pressure to Max. 3 bars)
- Three different materials can be filled in the re-feeder at the same time by filling into different zones. (50ml each zone) via KF25 adaptor
  
|
|
Temperature Controller
|
- 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
- Built-in PID Auto-Tune function with overheating & broken thermocouple protection.
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Eurotherm 3000 precision temperature controller is optional with +/- 0.1ºC accuracy
|
|
Dimensions
|
340mm×220mm×1200mm ( L x W x H)
|
|
Net Weight
|
~40 Kg
|
|
Warranty
|
One-year limited warranty (Consumable parts such as heating elements, processing tubes, and o-rings are not covered by the warranty, please order the replacement at related products below.) |
|
Laptop & software (Optional)
 
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial)
- Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces
|
|
Compliance
|
- CE Certified
- NRTL or CSA certification is available at an extra cost
|
|
Warning
|
|
|
Reference Video
|
|
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|