|
|
Home Page
8 Zones 1100C Max 4" OD Tube Furnace w/ Touch Screen Temperature Control Panel - OTF-1200X-VIII-100
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
Please email for lead time
Item Number: OTF-1200X-VIII-100
Transported by LTL Freight (Truck)
|
OTF-1200X-VIII-80 is an Eight-zone 3" ID split tube furnace with a separated touch screen temperature control unit and max working temperature of 1100oC. This eight-zone furnace can create a step thermal gradient or long constant temperature zone up to 60" within +/- 0.5ºC by adjusting the seven zone temperature. The furnace is installed with 100 OD x 92 ID x 2700 mm L ( mm) quartz tube and Ait-tight flange, and also can accept various processing tubes from 1" to 4".
SPECIFICATIONS:
|
Furnace Structure
|
|
|
Power & Voltage
|
- AC 208-240V Single Phase, 50/60 Hz
- 9 KW Max. (50A breaker required)
- Powder cord is included without plug
- Note: If use 208V, three-phase power panel, need min. 30A breaker
|
|
Continuous Temperature
|
- 1100 °C under flowing gas
- 1000 °C under vacuum < 1 torr
- 1000 °C under vacuum < 1 torr
|
|
Max. Heating Rate
|
<= 10 °C /min
|
|
Quartz tube &
Thermal Block Placement
|
- Quartz Tube: 100 OD x 92 ID x2700 L mm
- Two fibrous alumina thermal blocks are included, which must be placed on two ends of the inside tube ( click pic below right )
  |
Vacuum Flange
|
- One pair stainless steel vacuum flange is included with a quick assembling flange (an outside clamp for quick installation) without cooling.
- Custom fitting is as request from customer ( 1/4NPT only , without valve )
|
|
Heating Zone
|
-
Eight independent heating zones:
Left and right heating zone length: 200 mm each and the rest heating zone length 150 mm each
-
Total zone length: 60" ( 1500 mm ) ( Including spacers between heating zone)
- Max. Constant temperature zone 60" ( 1500 mm ) if 8 zones heated at the same temperature ( within +/- 5°C)
|
|
|
- One touch screen digital temperature controller built-in a separated unit, which can control seven heating zones independently
- Each channel is PID automatically controlled and saves 10 programs and each program has max. 30 segments
- Built-in overheating & broken thermocouple protection.
- +/- 1 ºC temperature accuracy.
- Eight K-type thermocouples (one for each zone).
- RS485 Communications Port built-in. and software included,
- The furnace may be operated by PC ( please order PC separately ).
  
|
|
Net Weight
|
- Furnace with Supporting Table: 450Kg
- Controller: 92 kg
|
|
Shipping Weight & Dimension
|
- Furnace with Supporting Table: TBD
- Controller: 300 lbs; 48"x 40'' x 63"
|
|
Warranty
|
One-year limited warranty for electrical parts. (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.)
|
|
Compliance
|
- CE Certified
- The furnace is ready to pass NRTLor CSA certification at extra cost.
|
|
Shipping Weight & Size
|
TBD
|
|
|
- The tube furnaces with quartz/mullite tubes are designed for use under vacuum and low pressure < 0.2 bar
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- * Vacuum pressures may only be safely used up to 1000°C
- The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube
|
|
Temperature Control Instructions
|
   |
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|