• AC220V+/- 10%,  50/60Hz, single phase, 600W
• 110VAC version is available via a 1000W transformer

Spindle Speed

• 50~1500 rpm adjustable  and displayed by digital meter

Cutting Stroke

• It depends on the cutting blade diameter
• 4" diamond blade:   35 mm Max
• 6" diamond blade:   50 mm max
• 8" diamond blade:    75 mm max

Gravity Automatic Cutting

• One set of fixtures is included for automatic gravity-cutting ( please see by clicking the picture left) as below
• One base fixture, which can rotate 360° horizontally  (Pic 1
• One mini vise that can be mounted on the fixture, which can tilt  ±15° vertically ( Pic. 2)
• One rotary specimen holder is driven by a DC motor, which is for slicing larger rods more easily (Pic. 3)
• A digital micrometer head with a 50 mm travel distance and  +/-0.01 mm accuracy is installed to control slicing thickness  (Pic. 4)
•       Pic. 1    Pic. 2          Pic. 3               Pic. 4

Manual Cutting

• One sliding rial with a vise is included for manual cutting ( rough cutting by pushing the vise by hand)
• An angle-cutting gauge is included
• Please click the picture left to see the details

• One set of cutting blades of Ø150mm (6") is included for immediate 
• Silicon carbide saw blade ( for nonferrous metal) )
• Corundum saw blade        ( for ferrous metal)
• Edge-bonded diamond saw blade    ( for ceramics and all types of materials)
• Please click the picture left to choose diamond cutting blades from 4" to 8"

• Must use anti-corrosion coolant during cutting to avoid rusting the lead screw. Please never use water as the coolant during cutting. You may select our LubeCool-150 lubricant as a coolant which will make the diamond blade cut more efficiently and prevent corrosion. Also, you can use W10-30 motor oil as a coolant, which is available at any auto store