Automatic 3D Printing Coater (100 mm x 100 mm) with Four Nozzles for Solid-State Battery, Micro-Battery, and Fuel Cells/Electrolyzer -TOPEM20

NOTE: ARCHIVE SITE If you are international, please click this. Please email for lead time Item Number: TOPEM20 Transported by LTL Freight (Truck) Email this page to a friend

The TOPEM20 3D printer uses Slurry Extrusion Lamination (SEL) technology, which extrudes battery slurry from the printing nozzle instead of the traditional coating method. This makes the battery manufacturing process faster, simpler, and less expensive. It is a great design for batteries with unique structures or the manufacture of micro-batteries, solid-state electrolyte battery, fuel cells, and electrolyzer. This machine can be compatible with the glove box, please contact MTI for more information. Specifications: Features 10" Touch Screen Panel supports multi-languages The final product is directly generated from the digital model Porous structures or any complex geometries can be created as needed SEL technology with rapid spraying and stacking slurry um level detector function to achieve 10um stable printing Equipped with a μm-level layer thickness detection for stable printing of electrolytes Working Voltage AC 208 -240V  Single Phase, 50Hz, 3kW Max. Coating Area 100 mm x 100 mm Nozzles Total Four Nozzles Nozzle Diameter: ≥ 0.06 mm Structure Forming Accuracy: 0.01 mm   Printing Auranccy: ± 0.01 mm Slurry Visocity 0.0003 -1.4 million mPa.s Substrate Holder A substrate is held by the vacuum chuck at room temperature (~ 70°C) Moving Speed ≤ 100mm/s Printing Thickness Range 0.01 - 1 mm Slurry Any kinds of anode, cathode, and electrolyte slurries with appropriate solid-content and viscosity. We have demonstrated the following slurry for battery fabrication. Lithium Cobalt Oxide (LiCoO2) positive electrode slurry Lithium Iron Phosphate (LiFePO4) positive electrode slurry High-nickel Ternary (NCM811) positive electrode Graphite negative electrode slurry Polymer solid electrolyte Polymer/Oxide composite solid electrolyte Printing Software Simplify3D Input Format STL or 0BJ Output Format G - code Compatible Software  Gursa / Microsoft3DBuilder / Slic3r / Skeinforge Compressed Gas Requirement    pic1                      pic2 0.5-0.8 MPa pressure required The compressed air pump is required for the operation, which is not included in the standard order, please click the link below to order one. Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn about the installation of a gas regulator.  Reference Video Dimension Control Unit: W 640 mm × D 650 mm × H 845 mm Printing Coater: W 100 mm × D 100 mm × H 50 mm Net Weight Control Unit: 90 kg Printing Coater: 95 kg

30L NRTL/CSA Certified Convection Oven (13x12x12, 250C) w/ Digital Temperature Controller - BPG-7032 Sale Price: USD$1,198.00	Vacuum Mixer w/ Vac. Pump & 2 Containers (150 & 500mL) & Optional 1L Tank-MSK-SFM-7 Sale Price: Starting at USD$2,489.00	Compact Spin Coater (8K rpm, 4" wafer Max.) w/ 3 Vacuum Chuck - VTC-100A Sale Price: Starting at USD$2,998.00
Compact Tape Casting Coater w/ Vac. Chuck (200Wx365L mm) & Film Applicator & Optional Heater - MSK-AFA-III Sale Price: Starting at USD$3,998.00	Automatic Roll To Roll Screen Printing System with IR Drying - SPC-2030-RR Sale Price: RFQ	PLC Controlled Precision Dip Coater (1-200 mm/min) for Large Substrate upto 10"x12" - PTL-200 Sale Price: RFQ