Browse Categories
Links
Search

24T Lab Press with Separable Hydraulic Pump & Safety Cover - YLJ-24TS

 
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding!





NOTE: ARCHIVE SITE
If you are international, please click this.
In stock
Item Number: YLJ24TS
Transported by LTL Freight (Truck)
YLJ-24TS is a desktop dry pressing machine up to 24 metric tons for materials/chemistry research laboratories to prepare the compound ceramic sample.YLJ-24TS has a transparent protection shield and separate manual hydraulic pump, which makes it easy to repair and replace.
 
Specifications:
   Max. Pressure 
  • 24 Metric Ton
  • The pressure gauge is built-in
Gauge Pressure Value to Force Conversion
Gauge Displayed Pressure Value (Mpa)
 5  
 10 15 20 25 30 35 40 45
Actual Force Applied to the Hydraulic Cylinder (Ton) 3 6 9 11 14 17 19 22 24
    • Displayed pressure value to actual applied force conversion: 1 MPa = ~ 0.55 Ton
    • The actual force applied to the vessel cylinder (Ton) is equal to the force applied to your working piece
    • For calculating the actual pressure (Mpa) applied to your working piece, please follow the equations below:
    •           P = T x g x 10/ (πr^2)
      • P: pressure (Mpa) applied to your working piece
      • T: force (metric ton) applied to the pressure vessel cylinder
      • g: standard gravity. g ≈ 9.8 m/s2
      • π: ~3.14
      • r: radius (cm) of the pressure vessel (1.5 cm)
      • *1000 Kg = 1 Metric Ton; 1 Mpa = 10 Kg/cm2 
Hydraulic Machine
  •  24T Max.
  •  The manual hydraulic pump is separated from the cylinder for safe operation
Operation Temperature
  • 10 - 40°C
Bottom Cylinder Traveling Distance
  • 20 mm maximum. The bottom cylinder (piston) is shown in the illustration in the dimension section. 
Overall Dimension 
  •    Press: 210 L x 165W x 315 H(Min) 490H (Max), mm
  •    Rocker base: 110 L x 350W x 320 H(Max), mm
Pressing Die (Optional)
  • Pressing dies with various diameters are available upon request at extra cost
Optional
  • An electric pump with programmable pressure control is available upon request
  • The manual pump can be replaced by the electric pump which has programmable pressure control to use inside the glovebox( Feedthrough for manual pump is not available )
  
Net Weight 100 kg
Shipping Weight & Dimension 160 lbs; 48"x40"x40"
Compliance CE Certified
Warranty
  • The pressing machine was quality inspected in the USA, lifetime support is provided
  • One-year limited standard warranty (Extended warranty is available up to 5 years at extra cost).
Operation Video and Instructions     
Application Notes
  • The pressing die cannot be used for powder with particle size < 30 microns. Small particles may slip into the gap between the pushing rod and the steel sleeve and cause damage to the sleeve during the compression. Ball mill, sieve the powder, and apply only the 32~75 microns powder to the pressing die to avoid damage. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the mold using ethanol after completing each experiment.
  • Do not raise the bottom cylinder (piston) more than its maximum traveling distance. (25 mm)
              
  • Warning: Customers must always wear protective goggles during operation !!!

Related Products
15T Compact Hydraulic Pellet Press for use in Glove-box - YLJ-15
Sale Price: USD$1,898.00
Dual Shaft Programmable Rotary & Shaker Ball Mill w/ 4 Jars - MSK-SFM-3-II
Sale Price: RFQ
330 MPa CIP (Cold Isostatic Pressing) Press with 30mm ID Vessel up - YLJ-CIP-20B
Sale Price: RFQ
Compact 5" Split Vacuum Furnace w/ 12" heating zone & Separated Controller (1200C Max) - OTF-1200X-S-5
Sale Price: RFQ
40T Manual Hydraulic Laboratory Press with Separable Pump - YLJ-40
Sale Price: USD$2,498.00
Automatically Pellet Pressing System (12 set Dies up to 24T) - AM-24T-12
Sale Price: RFQ
Shopping Cart
Your cart is empty.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
2024 MRS Fall Meeting December 1-6 Boston MA Booth 901

AABC US December 9-12 Las Vegas NV Booth 812

Click here to see our past conferences
 
Notices
1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.