|
|
Home Page
Compact CIP with 22mm ID Vessel Max. 380 Mpa for use in Glovebox - YLJ-CIP-15
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
In stock
Item Number: YLJCIP15
Transported by LTL Freight (Truck)
|
YLJ-CIP-15 is the smallest cold isostatic pressing (CIP) in the world. It has a 22mm ID hydraulic chamber made by ultra-strength alloy, which can provide isostatic pressure up to 400 Mpa via a 15T hydraulic press. It is an excellent tool to prepare high-density compound pellets and a small-diameter rod. CIP-15 has a small footprint and can be placed in a glove box to prepare air-sensitive materials. A plastic protection cover is included. The machine also can be used as a pellet press.
Specifications:
Pressure Vessel
|
|
| Max. Hydraulic Pressure in Chamber |
300 MPa -- continuous holding
380 MPa --- less than 5 minute |
Gauge Pressure Value to
Force Conversion
Optional digital meter with alarm
|
Gauge Displayed Pressure Value (Bar) for 87 mm Dia. Hydraulic Press
|
100 |
200 |
300 |
387 |
| Optional Digital Gauge Displayed Pressure Value (Mpa) for 87 mm Dia. Hydraulic Press |
10 |
20 |
30 |
38.7 |
| Actual Force Applied on the Hydraulic Press (Ton) |
3.8 |
7.6 |
11.5 |
14.7 |
| Pressure Applied to CIP Vessel ( Mpa) vs 22mm vessel cylinder |
98 |
196 |
296 |
380 |
- Notes:
- The actual force applied to the Vessel Cylinder (Ton) equal to the force applied to your working piece
- Digital pressure Gauge ( 60Mpa ) with Alarm is available upon request ( Click picture to see specs & cost)
- For calculating the actual pressure applied to your working piece, please follow the equation below:
F=P_(Gauge Displayed Pressure Value (GDPV)) ×S_(Cross-section area of the inside piston)
Since 1 Bar = 1.0197 kg/〖cm〗^2, Diameter of piston is 7cm
Assume Gauge Displayed Pressure Value is 100
F=101.97 ×π×(〖D/2)〗^2=3922.78 kg Force≈3.9 Ton force
Therefore, From pressure gauge value to actual force is 26.31
Assume Diameter of your Die is 4 cm, and Gauge Displayed Pressure Value is also 100 Bar
Then, the actual pressure on your working piece is:
P_(actual on working piece )= F/S_(Cross-section area of the working piece )
P_(actual on working piece )= (3.9 Ton)/(12.56 〖cm〗^2 )=310 Bar
In general:
P_(actual on the working piece )=(P_( GDPV)/26.31) / (π*r_(Crosection area of the working piece)^2 )
|
| Hydraulic Machine |
|
Botton Cylinder Traveling Distance
|
20mm maximum, the bottom cylinder (piston) in the cross-section illustration in the dimension section below |
| Operation Temperature |
10 - 40°C |
Dimensions
 
|
|
| Net Weight |
70 Lbs |
| Shipping Weight & Dimensions |
|
| Compliance |
CE Certified |
| Warranty |
- One year limited with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
| Operation Video |
 
|
| Application Notes |
- You may use the liquid rubber to seal the sample to be CIP ( click Pic below to order ). Check this link to understand liquid rubber for sample preparation. ( Pic. 1)
- Also, you may use a chamber vacuum sealer to seal the sample before CIP ( Pic. 2)
- In order to get a high density of the sample, you shall press pre-pressing a pellet, then CIP ( Pic. 3)
-
 Pic. 1  Pic. 2  Pic. 3
|
| Warning |
- Never let the press hold the target pressure be longer than 8 minutes,
- It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red or green buttons in this period.
- Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
- Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (20mm)
|
Packing List:
|
Name |
Qty |
| 1 |
Main machine (15T Manual hydraulic pressing machine) |
1 unit |
| 2 |
Cold isostatic pressing dies (locating plate, top, and bottom pressing die) |
1 set |
| 3 |
Black Rubber Rings O.D 7/8" |
3 pcs |
| 4 |
Pushing Rod Handwheel |
1 pc |
| 5 |
Hydraulic pressing oil |
1 bottle |
| 6 |
Socket Head Screw Driver |
1 pc |
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|