Complete CIP Die Set (22 mm ID Max.400 Mpa Vessel) , EQ-CIP15-DIE

**Important Notice**
This is our archived version of MTI old website. Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions. Please navigate our new web MTI's New Website. Thank you for your understanding!

NOTE: ARCHIVE SITE

If you are international, please click this.

In stock

Item Number: CIP22D

Quantity:

Email this page to a friend

EQ-CIP15-DIE is Complete CIP Die Set for Cold Isostatic Press. It has a 22mm ID hydraulic chamber made by ultra-strength alloy, which can provide isostatic pressure up to 400 Mpa via a hydraulic press. It is an excellent tool to prepare high-density compound pellets and a small diameter rod.

Specifications:

Structure & Dimension
Pressure Vessel	22mm ID. x 120mm Height max available sample height 70mm Made of high-strength alloy with stainless steel protective jacket
Max. Hydraulic Pressure in Chamber	350 Mpa ( hold for continuous )-- ( Press setting at 13.3 T ) 380 MPa ( Hold less than 5 minutes) --{ Press setting at 15T ) 400 Mpa Max. Hold less than 30 seconds ( Press setting 15.5T)
Hydraulic Machine (optional)	15 T - 24T Please click the picture below to choose a hydraulic press
Operation Temperature	10 - 40°C
Net Weight	18 Lbs
Shipping Weight & Dimension	22 Lbs, 9 In. x 7 In. x 6 In.
Warranty	One year
Operation Video
Application Notes	You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order). Check this link to understand liquid rubber for sample preparation. You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order) You may use the machine as a dry pressing to order pressing die (click Pic below right) Pic. 1 Pic. 2 Pic. 3
Warning	Never let the press hold the target pressure be longer than 8 minutes, It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period. Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing If you order the die only and using your own press machine, , MTI is not responsible for the safety

Packing List:

	Name	Qty
1	Cold isostatic pressing dies (locating plate, top and bottom pressing die)	1 set
2	Black Rubber Rings O.D 7/8 "	1 pcs
3	Hydraulic pressing oil	1 bottle
4	Screw Driver	1 pc

Related Products

Compact CIP with 22mm ID Vessel Max. 380 Mpa for use in Glovebox - YLJ-CIP-15

Sale Price: USD$4,998.00

330 MPa CIP (Cold Isostatic Pressing) Press with 30mm ID Vessel up - YLJ-CIP-20B

Sale Price: RFQ


	Your cart is empty.


	Email Address:

MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:

2024 MRS Fall Meeting December 1-6 Boston MA Booth 901

AABC US December 9-12 Las Vegas NV Booth 812

Click here to see our past conferences

Notices

1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.