|
|
Home Page
Single Container (300ml) Planetary Centrifugal Ball Mill & Mixer - MSK-PCV-310AR
Important Notice
This is our archived version of MTI old website.
Price, inventory, and technical information IS NOT accurate. Please do not use them as factors for purchasing decisions.
Please navigate our new web MTI's New Website. Thank you for your understanding! |
|
|
In stock
Item Number: MSKPCV310AR
Transported by LTL Freight (Truck)
|
MSK-PCV-310AR is a compact single-container centrifugal milling/mixer machine designed for mixing and ball milling slurries, pastes, and dry powder materials, especially for some high-viscosity materials. The standard package includes one steel milling jar and two 300L of containers. As an ultra-high-energy ball milling, the device can reach 223 G Max. impact force and get nanoparticles < 10 nm within several minutes.
Features
|
- Compared with other brands of the planetary centrifugal mixer, MSK-PCV-310AR has the following unique features:
- Single containers for larger quantities at a compact dimension
- The special container used as a ball milling
- Low voltage DC motor which allows use in Ar gas glovebox
- The gas inlet port is built-in for running under an inert gas atmosphere
- Centrifugal acceleration: 223 g Max.
- Sample Materials:
- Nanopowders, Ceramic powders, Slurry, Paste, Mechanical alloying with special alloy jars
|
| Power |
- Input: 110 or 220 VAC Single Phase, 50/60 Hz
- Universal switch power adaptor with 24 VDC output （ 1000W） is included
- Power: 450 W
|
Mixing
Speed & Force
|
- Planetary Centrifugal Mixing with 223 G impact force with a single container
- Fixed speed ratio (0.4X between main plate revolution and container rotating)
- Main Rotation Platen (revolution motion): 200 rpm - 2,000 rpm (adjustable)
- Container Spin (rotation motion): 80 rpm - 800 rpm (fixed at 0.4X of the revolution speed)
- The centrifugal force of rotation and revolution induces convection to mix high viscosity material up to 80,000 Pa S.
- The compact mixer can be put in a standard glovebox with Ar gas
   
|
Containers and Counter-Weights
|
- Three containers are included:
- One 80ml container made of Cr12MoV Steel for ball milling ( Zirconia ball included ) ( Pic. 1 and 2)
- Two 300 mL containers with gas vents, made of high-density Polyethylene (Pic 3 and Pic. 4)
- Total weight limit (containers + samples): 150 g ( dry mixing ) -300g. ( wet mixing )
- Note: dry mixing has more friction than wet mixing due to more friction
-
 Pic. 1  Pic. 2  Pic.3  Pic. 4
|
| Optional containers |
- 100 mL containers with adapter and gas vent, made of high-density Polyethylene (Pic. 5)
- 30 mL containers with adapter and gas vent, made of high-density Polyethylene (Pic. 6)
- An adaptor for three 30ml jars for high-throughput mixing (Pic. 7)
- Air-tight container for milling air-sensitive materials (Pic. 8)
- Please click here to order the optional adapters and jars.
-
 Pic. 5  Pic. 6  Pic. 7  Pic. 8
|
| Max. Mixing Volume and Weight |
| Container |
Max Sample Volume |
Max Sample Weight |
Max Gross Weight (Container Included) |
| 300 mL |
150 mL |
140 g |
300 g |
| 100 mL |
50 mL |
45 g |
80 g (adapter not included) |
| 30 mL |
15 mL |
12 g |
20 g (adapter not included) |
- Warning: overload may damage the device. Please follow both the volume and weight limit as above when loading the sample
|
Control Panel
& Program |
- Touch screen control panel.
- Save up to 6 mixing recipes in memory, as shown in Fig.1 for speed, running time, and rest time
- The maximum running time for each segment is 200 sec. The maximum total running time is 600 sec (Fig. 2)
- Interval and cooling time set up between cycles in Fig 3.
-
 Fig.1  Fig.2  Fig.3
|
| Gas Cooling |
- Cooling gas flow is required to prevent bearings and sample stages from overheating.
- Gas inlet: 6 mm push-to-connect
- The optional equipment can be used as a source of cooling gas.
- If the mixer is placed in the ambient environment,
- Air compressor or N2 gas tank is a common practice to supply 3-5 psig gas
- If the mixer is placed in the glove box,
- Ar/N2 gas tank feeds the mixer via gas feedthrough.
- Place a compact gas pump (24VDC) in the glove box directly to supply pressurized gas without changing the glovebox environment.
 
|
| Safety and Protection |
- Safety warnings and interlocks are integrated. The unit automatically stops when
- The unit is overloaded with the sample
- The emergency button is pressed.
- The top cover is opened
|
| Compliance |
- CE certified
- NRTL or CSA certification is available upon request at the extra cost.
|
| Warranty |
- One year limited standard warranty with lifetime technical support
|
| Dimension |
  |
| Weight |
|
| Shipping Weight & Dimensions |
|
Operation Video and Instructions
|
 |
| Application Notes |
- Always use the mixer on a level & stable surface for best performance and maximum safety
- Do not use the mixer in a hazardous atmosphere, or with flammable, explosive, corrosive, poisonous material! Check the chemical resistance of the container with different materials before loading the sample!!!
- Do not overload the mixer! Use a digital balance to make sure the sample loading is balanced before mixing
- Double-check if the containers are mounted correctly and securely before mixing
- Only use the included containers for the mixing operation! Double-check to make sure there is no foreign object in the mixer before mixing
|
|
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|